10(23)
Duplex Fuel Filter / Separator
DUAL FBO
Operation and Maintenance Instructions
73309 031912
©
Parker Hannifin
Racor Division
7. INSTALLING AND COMMISSIONING
Before installation, make sure that all components are in proper
condition and that all required parts are at the installation site.
7.1. Transporting and storing
Follow these guidelines for transporting and storing:
•
Keep the device away from excessive temperature variations and corrosive
chemicals.
•
Keep the device and accessories dry.
•
The device must be kept safe from mechanical effects, hits, excessive static loads
and their transport must be performed without deforming or damaging the
device/packaging.
•
When transported the device/packaging must be secured in a fixed position and
should not be transported together with sharp objects.
7.2. Precautions
When installing the system, pay special attention to the following:
•
Installation
base
shall be level and even.
•
Supporting bracket or piping may not cause any stresses on the filter (twisting,
pulling, etc.).
•
Sufficient space is available for installation work (Cf. Installation Drawing).
•
Uncoupled accessories like sensors, gauges, etc. are properly connected
•
All screws and connections are properly tightened.
