manualshive.com logo in svg

Parker Commercial Hydraulics PGP030/031 Series, Руководство по обслуживанию

Поделиться
Скачать
Parker Commercial Hydraulics PGP030/031 Series Скачать руководство пользователя страница 2

2

Parker Hannifin Corporation
Gear Pump Division
Youngstown, OH

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation
by users having technical expertise.  It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog.  Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for
making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.

WARNING

 

The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the “Offer of Sale”.

Offer of Sale

Service Manual HY09-SM030/031/050/051/US

Table of contents

Series PGP 030/031     Series PGP 050/051

Use Genuine Parker Replacement Parts

DESCRIPTION

   PAGE NO.

General Instructions ............................................ 3

Disassembly instructions .................................. 4-6

Assembly  instructions ...................................... 6-9

Guidelines for acceptable wear ........................... 9

Tool list ............................................................... 10

Lubrication and oil recommendations ......... 11-12

Recommended start-up procedures
for new or rebuilt pump ...................................... 12

Recommended test procedure .......................... 13

Offer of sale ....................................................... 14

Содержание Commercial Hydraulics PGP030/031 Series

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды