Parker ACR9000, Руководство по установке

Страница: 48 / 198

Parker Hannifin
General Purpose Inputs/Outputs Connector Pinouts
Table 22 contains the General Purpose (GP) Inputs/Outputs and Trigger
Inputs connector pinouts for the 2/4 Axis Configuration controller. Table 23
on page 49 contains the pinout for the additional GP Inputs/Outputs
connectors on the 6/8 Axis Configuration.
Use only Trigger Inputs 24 through 31 to capture position on A
XIS
0 through
A
XIS
3, and E
NCODER
8.
General Purpose
Inputs 0
−
11
General Purpose
(Trigger) Inputs 24
−
31/
Outputs 32
−
35
AcroBASIC Bit Pin AcroBASIC Bit Pin
Input 5
− 25
Trigger Input 29
− 25
Input 0
− 24
Trigger Input 24
− 24
Input 0+ 23 Trigger Input 24+ 23
Input 1 −
22
Trigger Input 25 −
22
Input 1+ 21 Trigger Input 25+ 21
Input 2 −
20
Trigger Input 26 −
20
Input 2+ 19 Trigger Input 26+ 19
Input 3
− 18
Trigger Input 27
− 18
Input 3+ 17 Trigger Input 27+ 17
Input 4
− 16
Trigger Input 28
− 16
Input 4+ 15 Trigger Input 28+ 15
No connect 14 No connect 14
Input 5+ 13 Trigger Input 29+ 13
Input 6 −
12
Trigger Input 30 −
12
Input 6+ 11 Trigger Input 30+ 11
Input 7
− 10
Trigger Input 31
− 10
Input 7+ 9 Trigger Input 31+ 9
Input 8 −
8
Output 32 −
8
Input 8+ 7 Output 32+ 7
Input 9 −
6
Output 33 −
6
Input 9+ 5 Output 33+ 5
Input 10
− 4
Output 34
− 4
Input 10+ 3 Output 34+ 3
Input 11
− 2
Output 35
− 2
Input 11+ 1 Output 35+ 1
Note:
Input 5 and Trigger Input 29 are paired on pins 13 and 25 to ease
cable assembly.
Table 22 GP Input/Output Connector Pinout (2/4/6/8 Axis Configuration)
48 ACR9000 Series Hardware Installation Guide
www.comoso.com