background image

0

WCS-SIF-01

Training & Maintenance Manual

Pneumatic

Parker Hannifin Corporation

Pneumatic Division

Richland, Michigan

www.parker.com/pneumatics

Offer of Sale

The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized 
distributors, are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This 
offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such item, when 
communicated to Parker Hannifin Corporation, its subsidiaries or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance 
of this offer.

1. Terms and Conditions of Sale:

 All descriptions, quotations, proposals, offers, 

acknowledgments, acceptances and sales of Seller’s products are subject to and 
shall be governed exclusively by the terms and conditions stated herein. Buyer’s 
acceptance of any offer to sell is limited to these terms and conditions. Any terms 
or conditions in addition to, or inconsistent with those stated herein, proposed by 
Buyer in any acceptance of an offer by Seller, are hereby objected to. No such 
additional, different or inconsistent terms and conditions shall become part of the 
contract between Buyer and Seller unless expressly accepted in writing by Seller. 
Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon 
Buyer’s assent to all the terms and conditions stated herein, including any terms 
in addition to, or inconsistent with those contained in Buyer’s offer. Acceptance 
of Seller’s products shall in all events constitute such assent.

2. Payment:

  Payment  shall  be  made  by  Buyer  net  30  days  from  the  date  of 

delivery of the items purchased hereunder. Amounts not timely paid shall bear 
interest at the maximum rate permitted by law for each month or portion thereof 
that the Buyer is late in making payment. Any claims by Buyer for omissions or 
shortages in a shipment shall be waived unless Seller receives notice thereof 
within 30 days after Buyer’s receipt of the shipment.

3. Delivery:

 Unless otherwise provided on the face hereof, delivery shall be made 

F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss 
shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are 
approximate only and Seller shall have no liability for any delays in delivery.

4. Warranty:

 Seller warrants that the items sold hereunder shall be free from 

defects in material or workmanship for a period of 18 months from date of shipment 
from Parker Hannifin Corporation. THIS WARRANTY COMPRISES THE SOLE 
AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. 
SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION 
OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT 
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER 
EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, 
OR COURSE OF DEALING ARE HEREBY DISCLAIMED.
NOTWITHSTANDING  THE  FOREGOING,  THERE  ARE  NO  WARRANTIES 
WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, 
TO BUYER’S DESIGN OR SPECIFICATIONS.

5. Limitation of Remedy: 

SELLER’S LIABILITY ARISING FROM OR IN ANY 

WAY  CONNECTED WITH THE  ITEMS  SOLD  OR THIS  CONTRACT  SHALL 
BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS 
SOLD  OR  REFUND  OF  THE  PURCHASE  PRICE  PAID  BY  BUYER,  AT 
SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY 
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR 
NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS 
ARISING  FROM  OR  IN  ANY WAY  CONNECTED WITH THIS  AGREEMENT 
OR  ITEMS  SOLD  HEREUNDER,  WHETHER  ALLEGED  TO  ARISE  FROM 
BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, 
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR 
STRICT LIABILITY.

6. Changes, Reschedules and Cancellations: 

Buyer may request to modify the 

designs or specifications for the items sold hereunder as well as the quantities 
and delivery dates thereof, or may request to cancel all or part of this order, 
however, no such requested modification or cancellation shall become part of 
the contract between Buyer and Seller unless accepted by Seller in a written 
amendment to this Agreement. Acceptance of any such requested modification 
or cancellation shall be at Seller’s discretion, and shall be upon such terms and 
conditions as Seller may require.

7. Special Tooling: 

A tooling charge may be imposed for any special tooling, 

including  without  limitations,  dies,  fixtures,  molds  and  patterns,  acquired  to 
manufacture items sold pursuant to this contract. Such special tooling shall be 
and remain Seller’s property notwithstanding payment of any charges by Buyer. 
In no event will Buyer acquire any interest in apparatus belonging to Seller which 
is utilized in the manufacture of the items sold hereunder, even if such apparatus 
has been specially converted or adapted for such manufacture and notwithstanding 
any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right 

to alter, discard or otherwise dispose of any special tooling or other property in 
its sole discretion at any time.

8. Buyer’s Property: 

Any designs, tools, patterns, materials, drawings, confidential 

information or equipment furnished by Buyer, or any other items which become 
Buyer’s property, may be considered obsolete and may be destroyed by Seller 
after two () consecutive years have elapsed without Buyer placing an order 
for  the  items  which  are  manufactured  using  such  property.  Seller  shall  not 
be responsible for any loss or damage to such property while it is in Seller’s 
possession or control.

9. Taxes: 

Unless otherwise indicated on the face hereof, all prices and charges 

are exclusive of excise, sales, use, property, occupational or like taxes which 
may be imposed by any taxing authority upon the manufacture, sale or delivery 
of the items sold hereunder. If any such taxes must be paid by Seller or if Seller 
is liable for the collection of such tax, the amount thereof shall be in addition to 
the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse 
Seller therefore upon receipt of its invoice. If Buyer claims exemption from any 
sales, use or other tax imposed by any taxing authority, Buyer shall save Seller 
harmless from and against any such tax, together with any interest or penalties 
thereon which may be assessed if the items are held to be taxable.

10. Indemnity For Infringement of Intellectual Property Rights:

 Seller shall 

have no liability for infringement of any patents, trademarks, copyrights, trade 
dress, trade secrets or similar rights except as provided in this Part 10. Seller 
will  defend  and  indemnify  Buyer  against  allegations  of  infringement  of  U.S. 
patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter 
“Intellectual Property Rights”). Seller will defend at its expense and will pay the 
cost of any settlement or damages awarded in an action brought against Buyer 
based on an allegation that an item sold pursuant to this contract infringes the 
Intellectual  Property  Rights  of  a  third  party.  Seller’s  obligation  to  defend  and 
indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after 
Buyer becomes aware of such allegations of infringement, and Seller having sole 
control over the defense of any allegations or actions including all negotiations 
for settlement or compromise. If an item sold hereunder is subject to a claim 
that it infringes the Intellectual Property Rights of a third party, Seller may, at 
its sole expense and option, procure for Buyer the right to continue using said 
item, replace or modify said item so as to make it noninfringing, or offer to accept 
return of said item and return the purchase price less a reasonable allowance 
for depreciation. Notwithstanding the foregoing, Seller shall have no liability for 
claims of infringement based on information provided by Buyer, or directed to 
items delivered hereunder for which the designs are specified in whole or part 
by Buyer, or infringements resulting from the modification, combination or use 
in a system of any item sold hereunder. The foregoing provisions of this Part 10 
shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive 
remedy for infringement of Intellectual Property Rights.
If a claim is based on information provided by Buyer or if the design for an item 
delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend 
and indemnify Seller for all costs, expenses or judgements resulting from any 
claim that such item infringes any patent, trademark, copyright, trade dress, trade 
secret or any similar right.

11. Force Majeure: 

Seller does not assume the risk of and shall not be liable for 

delay or failure to perform any of Seller’s obligations by reason of circumstances 
beyond the reasonable control of Seller (hereinafter “Events of Force Majeure”). 
Events of Force Majeure shall include without limitation, accidents, acts of God, 
strikes or labor disputes, acts, laws, rules or regulations of any government or 
government  agency,  fires,  floods,  delays  or  failures  in  delivery  of  carriers  or 
suppliers, shortages of materials and any other cause beyond Seller’s control.

12.  Entire  Agreement/Governing  Law: 

The  terms  and  conditions  set  forth 

herein, together with any amendments, modifications and any different terms 
or conditions expressly accepted by Seller in writing, shall constitute the entire 
Agreement concerning the items sold, and there are no oral or other representations 
or agreements which pertain thereto. This Agreement shall be governed in all 
respects by the law of the State of Ohio. No actions arising out of sale of the 
items sold hereunder or this Agreement may be brought by either party more 
than two () years after the cause of action accrues.

WCS-SIF-01  11/06  5M  IGS  Printed in U.S.A.

Parker Hannifin Corporation

Pneumatic Division

8676 E. M89

P.O. Box 901

Richland, MI 49083 USA

Tel:  (69) 69-5000

Fax:  (69) 69-5385

Customer/Technical Service
Tel:  (69) 69-5575

Fax:  (69) 69-5385

Web site:  www.parker.com/pneumatics

E-mail: 

[email protected]

Содержание AA Series





















Отзывы: