Parker Research Corp DA750 Скачать руководство пользователя страница 6

6

SERVICE DATA

Each DA750 is thoroughly tested and adjusted before shipping from the factory. However,

while operators and maintenance department personnel should be familiar with the

function of the electrical circuits, only authorized personnel should attempt to adjust or

repair the unit.

WARRANTY

The DA750 is warranted against malfunction due to defective material and workmanship.

The warranty shall cover repair or replacement of the DA750 at no charge (less incoming

freight charges) for a period of one (1) year from the date of purchase. Warranty will not

apply to units that have been altered or to those units that have been used improperly.

In the event of malfunction, return the unit (prepaid) to the factory. Repair or replacement

of the defective unit will be made at the discretion of Parker Research  Corporation. The

repaired or replacement unit will be returned to the original purchaser prepaid.

Note:

Do

not return cables or prods with defective unit.

SHIP T0:

PARKER RESEARCH CORPORATION

2642 ENTERPRISE ROAD WEST

CLEARWATER, FLORIDA 33763

ATTENTION: REPAIR DEPT.

Содержание DA750








Отзывы: