14
15
ASSEMBLY
6
ADD FUEL
1. Set pressure washer on a clean and level surface
in an area that is well ventilated.
2. Remove fuel cap.
3. Insert a funnel into the fuel tank and carefully pour
gasoline into the tank until fuel level reaches 1 1/2
inches below the neck.
1. Place pressure washer on a level surface.
2. Remove the dipstick to ensure you do not overfill
the engine.
3. Carefully add between 520 ml (17.6 oz) of 4-Cycle
engine oil (SAE30) to empty reservoir until oil
reaches the out edge of the oil fill hole (crankcase
dipstick hole)
Be sure to replace both dipsticks before attempting
to start the engine.
5
ADD / CHECK OIL
7
CONNECT GARDEN HOSE
1. Attach the water inlet/hose lock if not already
installed
2. Connect hose to water inlet and tighten by hand.
ASSEMBLY
8
CONNECT HIGH PRESSURE HOSE
1. Attach end of high pressure hose to the high
pressure outlet on pump.
2. Care should be taken to ensure the the threads are
not crossed when connecting the hose.
Oil and fuel must be added to unit prior
to first use. To avoid spillage, do not
overfill fuel tank as gasoline expands.
UNLEA
DED
GASOL
INE
SAE30 O
IL
