MAX
MIN
75mm
25mm
20
OPERATION
21
STOPPING THE ENGINE
Release the engine start/stop lever, it will return to its
Initial position and the engine will automatically switch
off.
OPERATION
START/STOP LEVER
CUTTING HEIGHT ADJUSTMENT
To adjust the cutting height, the wheels can be removed
and adjusted manually to one of three settings. Set each
wheel to the same height to ensure an even cut.
WARNING:
Adjust the cutting height
only when the engine is switched off.
MIN
TO
MAX
-
+
From position 1 to position 3. The cutting height
ranges from 25mm to 75mm
MOWING
Select your required setting.
Start the engine and allow it run.
Keep a firm grip on the upper handle with engine stop/start lever closed and walk along with it to start mowing.
WORKING ADVICES
•
Walk, never run with the mower, be very careful when mowing uneven or rough ground.
•
Mow across slopes, never up and down.
•
Be careful when changing the direction of the mower on a slope.
•
Do not mow excessively steep slopes.
•
The best result will be achieved if the grass is dry. Wet grass will tend to clog the blade and the grass collection system.
•
Never use the lowest cutting height for the first cut of the season or in drought conditions.
•
Only about one thirds of the grass height should be cut.
•
When mulching, to ensure that the cut grass can be scattered efficiently, do not cut high or wet grass. When you have been cutting for several
minutes, please stop the mower, and clean the blade and the deck.
•
Do not remove grass debris in the mower casing or on the blade by hand or with your feet. Instead use suitable tools such as a brush or broom.
WARNING
Always observe the strictest safety procedures when using the lawnmower. Carefully read the safety instructions
of this manual before proceeding with use.
WARNING!
Never open the ejector flap when the grass bag has been detached (to be emptied) and the engine is still
running. The rotating blade can cause serious injuries!
