11
22
Linking up Signal and Speaker Systems in Case of Operation of Two Amplifiers
within a Two-Way Stereo Set
(Option 1)
(only when an input module with a crossover is installed)
To Channel 1
Input Signal Source
To Channel 2
Input Signal Source
Amplifier 2
Amplifier 1
Channel 1 Satellite
Channel 2 Satellite
Channel 2 Subwoofer
Channel 1 Subwoofer
FRONT PANEL
Power switch.
LEVEL
–
input signal attenuators for channel 1 & 2, respectively.
ALARM LEDs.
Indicate alarm status and protection of the respective channel in case of:
–
DC output condition or powerful LF fluctuations;
–
output stage overheating*
Note:
* See: page 5, Thermal Protection.
CLIP (overload) LEDs.
Indicate overloading (sound distortion) and limiter activation for the respective
channel.
SIGNAL LEDs.
Indicate signal output from channel 2 & 1, respectively.
POWER LED
