
Fault
Possible cause
Procedure
The compressor
does not start up.
The power cord is not
plugged into the device
properly.
Check that the power
cord is seated correctly
in the compressor
power cord socket.
The power plug is not
plugged into the mains
socket properly.
Check that the power
plug is seated correctly
in the mains socket.
No medication is
coming out of the
nebuliser.
The nebuliser nozzle is
blocked.
Clean the nebuliser.
The connection tubing
is not connected
properly.
Check that both ends
of the tubing are seated
properly.
The connection tubing
is leaking.
Replace the
connection tubing.
- 42 -
5
TROUBLESHOOTING
Table: Faults
In the event of faults that ...
In the event of faults that are not listed in this chapter, or if the
suggested procedure does not correct the fault, contact the
PARI GmbH Service Center [See also: 7.4 Contact].
Содержание BOY SX
Страница 2: ...Gebrauchsanweisung 3 Instructions for use 27 de en...
Страница 50: ...50...