Parblo Coast10, Быстрая настройка

Страница: 10 / 24

4. Q: How to install the drivers?
A: Open the Driver Files downloaded, please install the Displaylink Driver firstly
and Digitizer Driver afterwards. The monitor displays after you installed the
Displaylink Driver. And please do the pen calibration after installed the Digitizer
Driver; if there is pen pressure sensitivity, it means that you did a successful
driver installation.
(Notes: If your computer is Windows, please switch off any of anti-virus software
of your computer/laptop and uninstall any tablet drivers of others tablet before
you install the diver.)
5. Q: What can I do if I cannot install the driver in the Mac system?
A: Please open the “System Preferences” of your computer and go to “Security and
Privacy” to choose “Anywhere”.
6. Q: What can I do if there is obvious lap between pen nib and cursor?
A:
Windows: Open the “Tablet Setting” in the start stray and go to the “Mapping”
to choose “Monitor 2” in “Select Monitor”; if you have three displays, you need to
choose “Monitor 3”. If there is still a subtle lap, please click “Calibration” to do
pen calibration.
Mac: Open “Driver Setting” and go to “Region Setting” to choose
“Monitor 2” in “Monitor”; if you have three displays, you need to choose “Monitor 3”.
If there is still a subtle lap, please click “Auto Calibration” or “Default” to do pen
calibration.
（
Note: Because there is a thick glass between the pen tip and the pen touch area,