SafeAir
™
M-350 Pro Installation Guide
25
https://parazero.com/
8.4
After Landing
•
Place the safety pin inside the canister and (optional) turn off the RC.
•
Disconnect the parachute cable from the SAP and connect the pyro dummy.
8.5
FTS Test (for RC equipped systems)
Applicable for RC 2.0 version 1.03 build 1.03 and later
In order to verify proper function of the FTS function perform the following steps. Make sure
not to power the motors during the test. This checklist assumes that the preflight checks are
complete.
1
Disconnect the parachute
cable from the SAP and
connect the pyro dummy.
Press the middle button on the
RC. The main menu will be
displayed. Scroll down using
the downward facing arrow
button to “Integration” and
press the middle button to
select
2
Select “Test Motor
-
cut” using
the middle button
3
Scroll
down
using
the
downward
facing
arrow
button to “OK” and long press
the middle button to select
Test Motor-Cut
Close menu
Approve
motor-cut test
->Long Press<-
Cancel
OK
RC Settings
About RC
Integration
Close menu
