OPERATION
To charge devices without a computer connection:
1. Connect the AC power cord to the power supply and plug into a wall outlet.
2. Connect the power supply to the dock Power connector.
3. Press and release the Power button to turn on the dock (Status Indicator turns solid green).
4. Insert iPod/iPhone® devices into slots.
Note: Each iPod/iPhone® indicates its charge status. Refer to iPod/iPhone® product
manuals for details.
To sync devices:
1. If the dock is already charging devices without a computer connection, skip to step 3.
2. Follow steps 1 through 3 from section “To charge devices without a computer
connection”.
3. Connect the included USB cable from an Apple computer USB port to the USB port for
computer connection on the dock. The dock Status Indicator will display rapid flashing
followed by slow flashing, which indicates that the dock is ready for syncing.
4. Use Apple iTunes® to sync devices.
Note: The devices will charge after syncing completes. You can also charge the units
without a computer by simply unplugging the USB cable to the computer
after
syncing
completes.
To turn the dock off:
1. If the dock is connected to a computer: verify that syncing operations are complete and
then disconnect the dock from the computer.
2. Press and hold Power button until Status Indicator turns off (about 2 seconds).
31 Waterloo Avenue
|
Berwyn, PA 19312
|
T: 610-647-5976
|
F: 610-296-2504
|
paratsolutions.com
