Parasym PK01, Инструкция по эксплуатации

Страница: 18 / 23

C ea g a d Ma e a ce
Replace batteries as soon as the flashing symbol appears. Care should be
taken to not get moisture in the internal circuitry or inside the battery
compartment.
1. Clean your device before use.
2. The case and lead wires can be cleaned by wiping with a damp cloth and
a solution of mild soap and water. Wipe dry. This must be done when the
device is switched off and the earclip electrode is not connected to the
unit.
3. D immerse the device in water.
4. D use any cleaning solution other than soap and water.
Te g Pa a
Parasym can be tested by making sure the batteries are in the device
correctly pressing the power button where the LCD screen should turn on
and remain on.
Te g he E ec de
The electrode can be tested before each treatment session with the
standard sensory and therapeutic threshold protocol found in the Quick
Start Section. Stimulation should be a constant tingling or pulsing sensation.
If this is intermittent there may be a fault in the lead. If there is a fault or if
the electrode is found to no longer work please contact Parasym Support.
[P IFU P 17