-5-
Introduction
Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. The broadcast reference quality of the Parasound TDQ-150 makes it an excellent choice for
your main system and its unique size and features make it particularly useful in custom and multi-zone
installations. Please take a few moments now to read these instructions thoroughly so you may fully
understand the capabilities of your new tuner.
Unpacking and Installation
Carefully unpack your TDQ-150 and remove all the enclosed accessories:
•
Remote control with batteries
•
Detachable AC cord
•
FM Folded Dipole 300
Ω
Antenna
•
FM 300 ohm to 75
Ω
balun matching transformer
•
AM loop antenna with self-adhesive bracket
Be sure to inspect the unit for any possible shipping damage. If you see any, contact your Parasound
Dealer immediately. Save the carton all of the packing materials in case you need to ship the unit for
repair. Before you proceed, find the serial number located on the rear panel and record it here for future
reference:
Serial #____________________
Date of Purchase____________________
Installation and Rack Mounting
Your TDQ-150 should be placed on a sturdy surface, out of direct sunlight that may interfere with its
remote control sensor. It should be in a well-ventilated area, away from heating ducts or radiators. Do
not place your TDQ-150 near digital equipment such as computers or digital processors that could cause
interference with broadcast reception.
The TDQ-150 is a one rack space height (1.75”) x half rack width (9 .5") unit. It can be mounted in a
standard 19-inch wide equipment rack side-by-side with a second TDQ-150 or with other Parasound half-
width components. An optional metal plate and bolts are available to fasten two half-width units together.
Making Connections to your TDQ-150
Before making any connections, turn off the power to your preamplifier and power amplifier. Make
certain that all your connections are secure and that there is no tension on the cables which could cause
them to pull loose later.
Audio Connections
Connect a pair of high-quality interconnect cables from the Output jacks of your TDQ-150 to any line
level input jacks on your preamplifier or system controller preferably marked Tuner.
