18 P/SP-1500 Owner's Manual
Remote Control Won't Work
Check batteries
Check for front panel operation to verify problem is not with P/SP-1500
DC Trigger Won't Activate Other Components
Check voltage at connector with DC voltmeter
Make sure other components do not require voltage exc12 Vdc or current exceeding 350 mA
If All Else Fails
If you cannot get your P/SP-1500 to operate properly after referring the troubleshooting guide, call your
Parasound dealer or Parasound Technical Service. We can suggest other diagnostic tests you can easily
perform. If we determine that your P/SP-1500 should be returned to Parasound or an Authorized
Parasound Warranty Center for inspection and possible servicing, call for the location of a warranty
center near you. If you choose to send it to Parasound, contact us to obtain a Return Authorization (RA)
number. You will be asked to re-pack the unit in its original packaging plus an additional outer box for
protection during transit. The Return Authorization number must be clearly marked on the outer carton
only. You should ship the unit by UPS with adequate insurance. You must also include a copy of your
purchase receipt to validate your ownership.
Units that arrive without your specific Return Authorization number, without a suitable shipping carton
or evidence of improper internal packing must be refused. We do not accept collect shipments. After
repair under warranty, the unit will be returned to you via prepaid UPS. In the case of an out of warranty
repair, contact us and we will advise you of the repair charges before you ship the unit to us. The same
packing and Return Authorization requirements apply.
Notes:
