Parasound HALO P 7 Скачать руководство пользователя страница 25

25

ARE YOU HAVING DIFFICULTY?

Repair or Service

Call your Parasound dealer fi rst. If the dealer can’t help you with your problem we encourage you 
to call Parasound’s Technical Service Department, toll-free at 1

-866-770-8324

, Monday – Friday, 

8am – 4pm Pacifi c Time. We can suggest other diagnostic tests you can easily perform. 
If we determine that your P 7 should be returned to Parasound or an Authorized Parasound 
Warranty Center for inspection and possible servicing, we will provide the location of a warranty 
center near you or shipping instructions for the unit’s return to Parasound.

Before You Return Any Unit to Parasound for Service

Before you send your unit to Parasound, you will need to obtain a specifi c Return Authorization 
(RA) number and shipping instructions from Parasound’s Technical Department. The RA number 
must be clearly marked on the outer carton. Use the original factory packing materials and arrange 
adequate insurance to cover its value. You must include a copy of your purchase receipt, since this 
document establishes the validity of this unit’s warranty. Warranty repairs are only performed by 
Parasound or Parasound Authorized warranty centers when your purchase receipt is from a 
Parasound Authorized Dealer or Parasound Authorized Reseller.

Shipments Will Be Refused by Parasound Under the Following Conditions:

1. Unit was sent without the Parasound-assigned RA number marked on the carton.
2. Unit was sent in an unsuitable shipping carton and is likely to have been damaged in transit.
3. Unit has inadequate packing materials and is likely to have been damaged in transit.
4. Unit was shipped collect for shipping charges. We do not accept collect shipments.
5. Unit was shipped via the US Postal Service.
6. Unit was sent to an address other than the address instructed by our Technical Department.

Note:

 The Parasound Technical Department shipping address is not the same as Parasound’s offi ce 

Note:

Note:

address. The Parasound offi ce does not accept packages.

Warranty Repair

Read your accompanying Parasound Limited Warranty carefully to understand the applicable rights 
and limitations. This section provides instructions for obtaining repairs, both for units covered under 
the Parasound Limited Warranty and for units or situations which are outside the Warranty.

Unit is not eligible for repair under the terms of the Parasound warranty if:

1. Unit was not purchased from a Parasound Authorized Dealer.
2. You do not have the original bill of sale or sales receipt from a Parasound Authorized Dealer.
3. You are not the original owner. The Parasound warranty is not transferable.
4. Unit’s serial number was removed, modifi ed, or defaced.
5. Unit shows evidence of abuse and/or misuse. 
6. Unit was modifi ed in any way.
7. A prior repair was attempted by an unauthorized repair station.

Содержание HALO P 7





























Отзывы: