Parasound Halo JC 3+, Руководство пользователя

Страница: 6 / 14

6
AC Voltage Selection
115v / 230v AC Voltage Selector Switch
This switch is found on the underside of the chassis. Make sure the 115/230V switch is set for the
correct AC line (mains) voltage
before you plug in the JC 3+’s AC power cord.
Note: The JC 3+ could be seriously damaged if the AC Voltage Selector switch is in the
wrong position!
Prior to plugging your JC 3+ into an AC power source, check the position of the 115v/230v
switch on the JC 3+’s chassis bottom and do not depend on the 115v or 230v markings on
the carton
.
The 115V setting is correct for North America where the JC 3+ can operate safely with AC line
voltages between 110-120v. Most other countries will require the switch to be set to 230V. With
the 230V setting the JC 3+ can operate safely with AC line voltages between 220V-240V.
Always turn off your JC 3+ and disconnect its the AC cord before making or changing
any input, output or trigger wire connections. Inserting or removing an input or output cable
while the JC 3+ and your preamp and power amplifiers are turned on can result in a blast of
sound that can damage your loudspeakers. Make sure there is no strain or tension on any cables
that could cause them to pull loose.