-7-
Operating Your C/DP-2000 Ultra
Loading Discs
To load a disc, gently slide the plexiglas door open. Remove the disc clamp and place it on the convenient
clamp pad on the top of the chassis. Next, load the disc onto the spindle, label side up, and gently place the
disc clamp on top of the disc. You'll need to slide the door to its fully closed position to enable the unit to
operate. The C/DP-2000 Ultra will read the disc and momentarily display the total time and number of tracks
on the disc. Once the player has read the disc’s table of contents, it is ready to play. Press PLAY and the disc
will start playing the first track on the disc.
Selecting Specific Tracks
To select a specific track on the disc, press TRACK NUMBER on the remote or TRACK SKIP on the front
panel to select the track you want to play. Start play by pressing the PLAY/PAUSE button on the remote or
front panel. Skipping ahead several tracks may require a few seconds due to the nature of the belt drive
mechanism and the weight of the clamper.
Front Panel Functions
Power Switch
Use this switch to turn your C/DP-2000 Ultra on and off. The power switch is not duplicated on the remote
control handset.
Play/Pause
Press PLAY/PAUSE to start disc playback. Once the disc is playing, you can press this button again to
temporarily pause the disc. The display will then indicate that the unit is paused. To resume play, press the
PLAY/PAUSE button again.
Track Skip
These buttons skip tracks forward and backward each time they are pressed. Pressing the previous track
button once initiates playing the current track over again.
Search
This is an audible fast review or fast forward cue to assist you in finding a specific segment within a given
track.
Stop
This button stops the disc and disengages the laser operation. If you have pressed STOP, pressing PLAY
starts playback from the beginning of the disc.
