background image

-3-

 

ADAM-Advanced Digital Adapter Module

3

2

1

+

Digital Output

ST Optical

AES/EBU

G

The ADAM is attached to a plate which replaces the one you just removed.There is a small 4 pin con-
nector socket on the top of the main printed circuit board of your  C/DP-1000, just inside the exposed
opening of the rear panel.  Attach the connector on the wire coming from the ADAM to this connector;
there is only one direction you can fit the plug onto the socket.  Make sure it is firmly connected, but if
there is resistance, don’t force it!  Try the other direction first so you don’t break the connector.  Secure
the ADAM with the two screws.  Your C/DP-1000 is now a highly sophisticated CD Transport.

Operating Your C/DP-1000

Power Switch

Use this to turn the unit on and off.  This control is not duplicated on the remote control handset since
you will have to load a disc on the player before using it anyway.

Open/Close

Press once to open the disc carousel; press again to close.  Never interfere with the carousel opening or
closing or try to force it with your hand.  Make sure the carousel is closed before you turn off the power.

Play/Pause

Press Play to listen to the disc.  Press a second time to pause precisely at any location.   Press Play once
again to resume.  During Play or Pause the laser is operating.  You can also use the Play button while the
disc loading tray is open and it will automatically close the tray and commence normal play.

Track Skip

These buttons skip tracks each time they are pressed.  If you are in the middle of a track, pressing this
button once will return play to the beginning of that track.

Disc Skip

These buttons skip tracks each time they are pressed.  If you are in the middle of a track, pressing this
button once will return play to the beginning of that track.

Search

This is a fast review or fast forward cue to assist you in finding a specific segment within a given track.

Stop

This disengages the laser operation and stops the disc.  Once you’ve pressed Stop, if you press Play
again the player will have to spin the disc again for a few seconds before Play can resume.

Содержание C/DP-1000









Отзывы: