-6-
If you still have difficulty after trying the above, call your Parasound Dealer or custom installer for
further advice. If he cannot help you, call Parasound Technical Service at (415) 397-7100. We may be
able to suggest some other diagnostic procedures. If we determine that the transport must be returned
for factory service, we will give you specific instructions, including a specific Return Authorization
number. Pack the unit carefully in both its original carton and its styrofoam protection and also an
outer overcarton for adequate safety. You must mark the Return Authorization number on the outer
carton only; units that arrive without evidence of adequate packing or without an outer carton or Return
Authorization number will be refused. After service we will ship the unit back to you via UPS.
Rewiring Your C/BD-2000 For 220 V - 240 V Operation
Your C/BD-2000 may be rewired for operation abroad. This involves moving a jumper wire on the
primary side of the power transformer. Please refer this voltage conversion to a qualified electronics
technician to avoid possible injury or damage to the C/BD-2000 .
With the C/BD-2000 wired for 120 V operation, there is a small 1/4" jumper wire labeled J004. To
convert the C/BD-2000 to 230 V operation, move the jumper to J003 so the neutral of the AC is
connected to the outer winding of the transformer instead of the center pin.
N/C
N/C
120 V Operation
230 V Operation
