Parasound 200 Pre, Руководство пользователя

Страница: 12 / 20

Parasound
®
200 Pre Owner’s Manual
Page 12
Front Panel Controls
Volume Knob
Rotate the Volume knob right or left to increase or decrease the volume level. The range is from 0 to
100. A setting of 100 corresponds to a preamp gain of 12dB. A setting of 76 is “unity gain” where the
output voltage is the same as the input voltage.
Input / Multifunction Select Knob
The Input knob on the front panel controls several different functions. The default function of the knob is
input selection. Each time the knob is pressed inward the function that the knob controls will change. The
knob functions rotate through in this order with each press:
Input
The default function (no press) of this knob is input selection. Rotating it cycles
through all of the inputs. Stop at the input you wish to hear.
Bass/Treble
After pressing the knob once, rotate it to increase or decrease the bass. Press
the knob again and rotate it to control the treble. Bass and Treble are adjusted in
1dB increments over a +/- 8dB range.
Balance
Press the knob again and rotate it to shift the balance to the left or right.
This can be helpful to compensate for speaker placement or room
acoustics. The maximum adjustment is 15dB to the Left or Right.
Sub Level
Press the knob again and rotate it to adjust the level of the Subwoofer
outputs. The maximum adjustment is +/- 15dB.