Patio Heater Instructions
OZGLOW F40 Permanent Installation
OPERATING INSTRUCTIONS
When this OZGLOW heater has been assembled follow the lighting instructions
on the data plate and test the heater operation. On the first light up or when the
bottle has been changed it may take several minutes to purge the air from the
pilot line.
Some smoke may appear around the emitter screen and reflector for the first
minute or two of the initial light up.
1.
Depress the control knob and rotate anti
clockwise to the pilot position.
2.
View the pilot through the pilot hole near the
burner.
3.
Hold the knob in the pilot position until the
pilot has been alight for 15 seconds. If the
pilot does not light repeat steps 1
– 3.
Rotate the knob anti clockwise from the pilot
position to either the high or low positions.
Rotate the knob clockwise to the pilot
position. If you rotate the knob fully
clockwise the pilot will also turn off.
© PARASOL HEATERS AUSTRALIA
MELBOURNE 61 3 9549 4466 | SYDNEY 61 2 9624 4486 | BRISBANE 61 7 3200 7877
www.parasolheaters.com.au
Created on 24/09/2015
Page 8 of 11
