PARASIT STUDIO MK3, Руководство пользователя

Страница: 4 / 9

Parasit Studio
Quantum Defrakulator MK2 Bill of Materials (BOM)
•
* Current Limiting Resistor for the sequencer LEDs. They share a
single resistor since there's always just one LED engaged at the
time. Use the appropriate value for your LED type.
•
I recommend using a 4.7K resistor for a diffused LED or a 15K
resistor for a clear superbright LED.
•
I recommend using multilayer ceramic capacitors for the 220nF
caps to keep the size down. For the larger values use electrolytic
capacitors as usual.
•
** LED5 is not supposed to be external. It's just part of the filter
circuit, so just mount it on the PCB on the component side like the
rest of the components. The LED type/size and colour is not critical.
Things not included in the BOM that you will also need:
1x Hammond BBDD/JJ enclosure, 1x DC jack, 1x 6.3mm mono jack for
the output, 12x knobs, 4x LED bezels (optional), 2x 3.5mm jacks
(optional, for the CV inputs)
Resistors R21 47K IC's
R1 100K R22 CLR* U1 CD4069UBE
R2 2.2K Capacitors U2 CD4052
R3 22K C1 220nF U3 CD4046
R4 100K C2 47uF U4 CD4015
R5 100K C3 220nF U5 CD4093
R6 4.7K C4 220nF
R7 220K C5 220nF Potentiometers
R8 4.7K C6 100nF RATE C50K
R9 220K C7 100nF FREQ 2 C100K
R10 330K C8 2.2uF FREQ 3 C100K
R11 15K C9 220pF PORTAMENTO A1M
R12 330K C10 100nF FILTER B500K
R13 220K C11 4.7nF rest of the pots (x7) B100K
R14 100K C12 6.8nF Switches
R15 47K C13 100uF LFO/STEPS DPDT on/off/on
R16 220K Diodes NAND/XOR DPDT on/off/on
R17 100K D1 1N4001 1x Momentary push button
R18 100K
R19 100K LED5** 3mm normal red diffused LED
R20 100K 4x LED's (for the sequencer)