5
12. Then place the aluminum
compression washer on the
quartz tube. Press down on the
aluminum compression washer
with an even steady pressure
(Fig. 20). This will roll the O-ring
into the area between the inside
of the black threaded sleeve
and the quartz tube. Check and
make sure it is seated evenly
around the circumference of the
quartz tube. Screw on the quartz
sealing aluminum nut hand tight
plus ½ turn.
13. Carefully replace the lamp(s) in
the quartz tube (Fig. 21). Reattach
ballast if you’ve disconnected in
step 5. Connect lamp(s) to ballasts
(Fig. 22). Turn on pump and check
for leaks. Replace the plastic cover
and the three screws. Plug in or
turn on the circuit breaker.
Fig. 20
Fig. 21
Fig. 22
