manualshive.com logo in svg

Paramount Fitness Ultra UV 004-422-2025-00, Руководство по установке и эксплуатации

Поделиться
Скачать
Paramount Fitness Ultra UV 004-422-2025-00 Скачать руководство пользователя страница 1

1555 Detrick Avenue.   Deland   Florida.   32724-2014
Toll Free:  1-866-649-5551   Phone: 407-600-5751

 

 [email protected]   www.ultravioletpools.come

004-422-0003-00 REV 031714

Pool, Spa & Pond 
Water Sanitizer 4BJ1

EPA Registered
#084221-AZ-001

INSTALLATION & 

OPERATIONS MANUAL

IMPORTANT SAFETY INSTRUCTIONS: 

READ COMPLETELY BEFORE PROCEEDINg.

When using this electrical equipment, basic safety precautions should 
always be followed, including the following:

 

WARNINg:

• Follow all applicable electrical codes.
•  Turn off power at main source before making any electrical connections

or servicing the unit.

•  To reduce the risk of electric shock, injury or death disconnect unit from

power supply

• Follow the instructions or risk of serious injury or death could occur!

UV ExPOSURE & PROTECTION:

UV-A and UV-B radiation can have adverse short and long term effects on 
the eyes and skin. Never look directly at a UV lamp that is connected to a 
power source. Avoid UV skin exposure at all times. 

Содержание Ultra UV 004-422-2025-00

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды