5 |
P a g e
The metal tabs on the adaptor snap into the battery’s slotted positive and negative leads. Once plugged
in, the end of cable can be plugged into the Paramount’s Power In port and, provided the battery is
charged, the mount should be ready to use.
Note that the adaptor’s polarity is machined into both the top and bottom pieces of the adaptor. The
two ends of the adaptor’s power cable are attached to each metal tab (Figure 2). The cable has two
color-coordinated terminal rings; red positive and black negative.
Do not
reverse, alter or modify these cables for any reason!
To avoid draining the battery, do not plug the adaptor into the mount until you are ready to
power on the Paramount.
Switching or changing anything out of this adaptor could result in shorting out the battery or
Paramount.
Figure 2: Inside the EGO Adaptor.
Mounting the Adaptor
Once the battery is attached to the Paramount Power Adaptor, you’ll want to mount the unit to the side
of the tripod.