5
3” Min (typ)
Fig. 6
Concrete Ring Installation (Fig. 6)
1.
Apply interior finishing material.
2.
Position the SDX Concrete Ring with the semi-circle
tab located at the top and then press the ring into
finishing material.
3.
Trowel the finishing material around outside and
inside of the SDX Concrete Ring.
4.
Form a watertight seal around the suction pipe.
5.
Wipe clean any finishing material that remains on the
SDX Concrete Ring's top edge and mounting
surface.
Concrete Cover Assembly (Fig. 7)
1.
Align the SDX Concrete Support with the alignment
tab located on the SDX Concrete Ring.
2.
Install three(3) machine screws through the SDX
Concrete Support. Secure the screws without over
tightening.
3.
Align the SDX Cover with the SDX Support holes.
4.
Install three(3) security screws through the SDX
cover. Secure the screws without over tightening.
Fig. 7
SDX CONCRETE INSTALLATION
(CONTINUED)
