SUMP INSTALLATION
SUMP INSTALLATION TO SHELL BEFORE SETTING POOL
Fig. 7
1.
Sand and clean this bottom surface area well
(see arrow). This is where the gasket will seal.
(Fig. 7)
2.
Glue gaskets to the face of the sump with
RTV Silicon glue. Be sure to line up all gasket
holes with the corresponding hole in the
sump.
(Fig. 8)
3.
Line up ninety of the sump to face the side of
the pool. Using two people or by reaching
thru from the inside of the pool position the
sump so the screw holes line up keeping the
sweep ninety facing the side of the pool.
Using the 12 flathead screws affix the sump to
the mounting ring.
(Fig. 8)
Fig. 8
For technical assistance call 1-800-621-5886 or contact your regional representative.
SCREW HOLES
TO POOL
WALL
