The controls are located on the back of the unit near the
top. Figure 2 illustrates the location of the controls.
Once the unit has been properly connected to a grounded
electrical outlet, it is ready to operate.
Note: ensure the house circuit breakers for the power
supply are turned on.
Operation from the Control Panel
Figure 2
1.
2.
3.
1/
2/
Control Panel
Operating Instruction
7
Power+Flame
HEATER I ON/OFF
HEATER II ON/OFF
Plug in your electric fireplace
For the flame effect, turn on switch 1
3/
For low level of heat (750W) turn on
switch 2
4/
For high level of heat (1500W) turn on
switch 2 and 3