PARAMOUNT BED K5 Series, Инструкция по эксплуатации

Страница: 11 / 40

CAUTION
2
10
When performing the height adjusment or inclination angle adjustment, pay attention
not to hit the wall and beam.
When setting up the stretcher, make sure that there is at least 20 cm clearance from
the wall.
The main frame moved back and forth during
inclination angle adjusment and could hit the wall,
causing damage or deformation of the stretcher.
Check around the stretcher before operating the stretcher.
Avoid transporting over uneven floors.
This may cause damage to the stretcher, or
deformation of failure of the stretcher. If moving
on uneven floor is necessary, move the stretcher
as slow as possible.
The stretcher or wall may be damaged or
deformed. Make sure that the stretcher does
not hit the wall and beam during the height
adjusment or inclination angle adjusment.
The stretcher operations may damage objects located around the stretcher, or may cause the
stretcher to be damaged or deformed.
2
SAFETY PRECAUTIONS
Secure at least 20cm clearance from the wall