paramondo Curve 2000, Руководство по установке, Страница: 77 / 84

www.paramondo.de
77
Connection and start-up
L1
N
PE
M
M
power
supply
230 V / 50 Hz
gr
een/y
ello
w
br
own
blue
L1 = Phase (brown)
N = Neutral (blue)
PE = Protective conductor
(green-yellow)
Connect the motor according to the connection instructions. To prevent that water penetrates the motor, the connection cable should be
always laid downwards with a loop.
TIP: For the connection of the power supply to the awning motor we advise to use the Hirschmann plug set. You can find it in our shop
under the article number 10050625.
PE = (green-yellow)
1 = N (blue)
2 = (black/brown)
1
2
3
2 = L1 (brown)
PE = (green-yellow)
1 = N (blue)
1
2
3
After the connection the motor vibrates briefly and enters automatically for 10 seconds in learning mode. Since the enclosed radio remote
control is already programmed, it can control the awning immediately. Should this not be the case, you can program the remote control
according to the instructions!
The end points are equally already set to suit the awning. Should you have to modify them, proceed as follows:
Connection side motor Connection side power supply
Adjusting screw for the end
point adjustment
red
white