PAGE 2
OPERATION MANUAL V1.0
RX8D / RX8TD
Parts and Functions
1. LCD
2. DOWN button
3. UP button
4. SET button
5. IrDA synchronising button
6. Power switch/volume control
7. IR sensor area
8. RF signal meter
9. Diversity A/B antenna
10. Transmitter battery power
11. Audio signal meter
First turn on the power and the LCD display will show last stored channel and frequency. Select
a channel that corresponds to the transmitter. When transmitter is turned on, the A/B diversity
antenna indicatorvwill appear to denote that it is connected.
Channel Synchronising of the Receiver and Transmitter
Align infrared areas of the receiver and transmitter within 10~30cm.
1.
Press the synchronising button
of the transmitter.
2.
The transmitter’s LED will
illuminate to denote
synchronising signal transmitted.
3.
The channel number on the
receiver’s LED will become the
same as the transmitter’s, which
means the receiver has been
successfully synchronised.
1.
Press the SYNC button of the
receiver.
2.
The transmitter’s LED
will illuminate to denote
synchronising signal received.
3.
The channel number on the
transmitter’s LCD will become
the same as the receiver’s, which
means the transmitter has been
successfully synchronised.
If it doesn’t work, check that you have the IR sensor panels aligned, that they are facing each other, devices are within
10~30cm of each other, and try again.
Sync Channel from Beltpack or Handheld Transmitter
Ú
Receiver
Sync Channel from Receiver
Ú
Beltpack or Handheld Transmitter
HANDHELD
BELTPACK
HANDHELD
BELTPACK
HANDHELD
BELTPACK
Содержание RX8D
Страница 1: ......
