Parallax PDT-NSU-7005-MP-I, Руководство по эксплуатации

Страница: 8 / 12

6.3 Power Supply Connector
Model No V- V+ Power Input
PDT-NSU-7005-MP-I GND +12-48VDC
Note: All Power Supplies should provide over-current and short-circuit protection, and should have
a capacity rating to meet the required output current for the device plus any PoE powered device
requirements.
6.4 PoE Compatibility
Model No IEEE 802.3af IEEE 802.3at IEEE 802.3bt
PDT-NSU-7005-MP-I
● ●
The PoE output for this model is compatible with PoE and PoE+ Standards, as can be seen in the
table above.
6.5 PoE Power Budget
Supply Voltage +12VDC +24VDC +48VDC
Total PoE Budget 60W 90W 120W
The PoE Power Budget is dependent upon the input supply voltage, as shown in the above table.