Web Site:
www.parallax.com
Forums:
forums.parallax.com
Sales:
Technical:
Office:
(916) 624-8333
Fax:
(916) 624-8003
Sales:
(888) 512-1024
Tech Support:
(888) 997-8267
Copyright © Parallax Inc.
Easy Bluetooth (#30085)
v1.3 4/14/2010 Page 1 of 9
Easy Bluetooth (#30085)
The Easy Bluetooth is a RoboTech RBT-001 Bluetooth serial module with an adapter specifically designed
to be used with the Parallax Board of Education
®
AppMod Header or breadboard. In addition, the Easy
Bluetooth can plug into any 0.1 inch spacing development platform which allows it to be breadboard
friendly, and also easy to implement into a soldering application. The module has two parts, the RBT-001
module and the SIP with voltage regulator PCB. With the on-board regulator, the module can be
connected to voltages higher than 3.3 VDC, such as the Board of Education regulated supply (+5 VDC)
without worry of damaging the unit; while the RX and TX can utilize serial communication at CMOS and
TTL levels.
Features
1.x & 2.0 Bluetooth Compliant
Class 2 Operation (nominal range up to 30 meters)
10-pin SIP package for breadboard, perfboard, or Board of Education AppMod Header
On-board regulator for safe operations across various voltages
CMOS & TTL Compatible
Key Specifications
Power requirements: 3.3 to 5.5 VDC
Communication: UART Command/Data Port
supports for up to 921.6k baud
Operating temperature: +32 to +113 °F
(0 to +45 °C)
Dimensions: 1.40 x 1.79 x .49 in (34.41 x 45.65
x 12.51 mm)
Application Ideas
Control a Boe-Bot via Bluetooth from a PC, Cell
Phone, or another Bluetooth module
Communicate with a device or project wirelessly
Packing List
RBT-001 Module
10-pin SIP with connector Module
(pre-assembled with RTB-001)
