17
4
2
2
ACCESS LEVELS
ACCESS LEVELS
Limited User level enables:
1. Panel setting and unsetting with a unique pass
code.
2. Setting and unsetting of the door chime facility.
3. Event log viewing.
Master User level enables:
1. All Limited User facilities.
2. Alteration of both Limited User and Master codes.
3. Walk test facility for all four set modes.
4. Clearing of event log (if allowed by the Engineer).
5. LED / Strobe / Bell / Extension Speaker test facility.
3
3
FEATURES
FEATURES
- 3 Access-Level Codes, all programmable
- Easy-set facility
- 6 Programmable alarm zones
- 4 Set / Part Set modes
- Fire alarm zone with unique alarm sound
- Personal Attack alarm zone
- Tamper zone
- 16 key backlit RKP keypad
- Dedicated Personal Attack key on keypad
- Dedicated Fire alarm key on keypad
- 18 Event Memory Log with forward and backward scroll
- Selectable Master or Engineer Log reset
- Independent Walk Test facilities for each Set / Part set mode
- System Test Function
- Optional remote keypads with internal sounders
- Programmable from any remote keypad
- Separate Bell and Strobe lamp outputs
- Zone omit facility on exit
NB Your Installation Engineer will have programmed all the system features to
ensure easy and convenient day-to-day use of your system. (See section 5
`Engineer Programmable Zones)
4
4
FUNCTIONAL DESCRIPTION
FUNCTIONAL DESCRIPTION
Operating Modes
Day Mode
This is the state of the panel when unset (not armed). Fire, Personal Attack and
Tamper inputs, however, remain active 24 hours a day. (These are referred to as 24
hour zones). Day mode is identified by the green ‘Day’ LED on the front of the RKP.
Set Modes
When the panel is set (armed) an activation of any Access, Immediate or 24 hour
zone will cause an alarm condition. When an alarm is generated any externsion
speakers will operate for the length of time programmed and the tone of the internal
sounder will be two notes repeated rapidly. The strobe lamp will also be activated
and will continue to operate until the panel is reset.
RDOC280 issue 1
