STARTING TREATMENT
1
Plug the power cord into a 110V outlet. The Power indicator light should be on (red) and
the Timer should show “00”.
2
Press “Power” and the default time duration will be set at 20 minutes. Adjust the time by
pressing the increase and decrease time buttons.
3
Adjust the steam output level by pressing the “Level” button. There are three settings:
low, medium, and high
4
To activate the ozone function, press the “Ionic” button.
About Ozone:
Ozone is a form of oxygen sometimes used as a form of disinfectant.
The ozone function in the facial steamer is an option. Check with applicable regulatory
agencies such as the Department of Health and the Cosmetology State Board
concerning the use of ozone in your area.
5
To place the unit on Stand-
by Mode, press the “Stand-By” Button. The unit will
decrease the temperature but maintain an elevated temperature (below approximately
212
°F) in order to minimize start-up time once operation is ready to resume.
USE
CONTROL PANEL
