Paragon Slimline 2 Slide
&
2 Slide Lo
Cleaning
Users Instruction
SECTION FOUR
Warning: -Before you clean any part of the appliance ensure that the appliance is turned off
and cool.
CLEANING:
BRASS DECORATIVE TRIM & FRET
• The finish of the brass trim and fret will from time to time need cleaning with a proprietary
brass cleaner i.e
.
: Brasso
• The trim and fret should be removed for cleaning. The fret should be removed before
removing the trim, which is held in place by four magnetic strips.
CLEANING:
BLACK PAINTED
or
CHROME EFFECT SURFACES
• These surfaces should be dusted regularly and any marks removed with a soft cloth.
• Abrasive or chemical cleaner should never be used.
CLEANING COALS AND PEBBLES
Important: -
Refer to the 'Heath
&
Safety Notice located
on
page
3
of this
booklet before cleaning or replacing any refractory material.
• The coals, pebb
l
es and ceramic parts are delicate and they should be handled with great
care.
• The loose coals and pebbles may be removed for cleaning. They can be brushed very
gently with a soft brush to remove dust or any deposits.
• Care should be taken to avoid contact with the refractory lining, this is a delicate surface
and should not be wiped or rubbed.
• A vacuum cleaner may only be used after all the loose coals and pebbles have been
removed.
SECTION FIVE
Like all appliances incorporating an aerated burner a Low frequency noise may be heard
,
particularly on the Low setting, this is quite normal and does not affect the operation of the
appliance.
It is advised that the fire is serviced annually this is more likely to provide trouble-free
operation.
It is important that: -
• The chimney or flue is checked annually to ensure clearance of combustion products.
• The fire does not normally require purpose-built ventilation but if for any special reason
purpose-built ventilation is provided it should be checked periodically to ensure freedom
from obstruction.
• Any debris from the chimney or flue should be removed
.
The fire should be allowed to cool
for three to four hours before it is removed.
• Rubbish must not be thrown onto the fuel bed under any circumstances.
• The cast fire front must be positioned in front of the fire whilst it is burning
5S184
