Paragon P10, Инструкция для пользователя, установка и обслуживание

Страница: 18 / 48

P a g e | 17
LT8540
P10 INSTALLATION INSTRUCTIONS
Prior to installation ensure that the local distribution conditions (identification of the type of gas
and pressure) and adjustment of the appliance are compatible G20 @ 20 mbar for natural gas
and G31 @ 37mbar for LPG.
The front of the fire act as a dress guard, conforming to BS 1945 (1971) and satisfies the heating
appliance regulations (1991). However, a guard conforming to BS6539 (1984) must be used to
protect young children, the elderly or infirm.
This appliance incorporates a safety device in form of an oxygen depletion system. It must not
be adjusted or put out of operation. This is a non
– serviceable item and must be exchanged as
a complete assembly using only the original ma nufacturer’s part.
A suitable proprietary fire surround with a 150 degree C minimum rating is required.
Class One
That is a conventional brick or stone chimney as used for a solid fuel appliance with an effective
cross sectional dimension of 225 x 225mm or a lined flue with a minimum diameter of 125mm.
The chimney must have a minimum effective height of at least 3 metres. Any permanent flue
restriction or variable damper are to be removed or locked fully open. The chimney should be
swept prior to installation if it has previously been used with a gas appliance or if it is a new
installation.
The P10 is designed to be fitted into a class one flue with a fire place which will require a 50mm
rebate. The other option is hole in the wall which can be plastered up to the edge of the fire
place frame or fitted with wall mounted non-combustible slips. The two methods will require
different size apertures.
Builder’ s opening aperture size when fitted in conjunction with a 50mm rebated surround
P10 MIN MAX
A 795 860
B 820 840
C 330 NA