Paragon GZ3DXL, Руководство по сборке, Страница: 6 / 24

of 24 6
1
1
1
1
4
33 33
4
x 4
1.A
1
1
Assembling the Corner Profiles
Place all the parts on a level surface
.
Make sure the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
STEP 1
Components
Support plate (3)
x 4
Roof connector (4)
x 4
Support frame (2)
x 4
Screw (33)
x 24
Place cor ner profiles (1) parallel to each other on the ground. Attach one roof connector (4) to each top
end as shown and fasten with screws (33).
ATTENTION:
The co r ner profile (1) has two screw
holes to connect it to the roof connector (4)
and 8 pre-drilled screw holes to attach rails (5,6) in
step 3 at its top end.
It has two screw holes to connect it to the suppo rt
plate (3) at its bottom end.
Top end Bottom end
Corner profile (1)
x 4
1
1