manualshive.com logo in svg

Paragon EL74, Общее руководство по инструкции

Поделиться
Скачать
Paragon EL74 Скачать руководство пользователя страница 17

In all modes use the NEXT key to advance to the next item to be programmed or reviewed and
the PREVIOUS key to go back to the previous item. Use the + and - keys to modify the current
(flashing) item.

Memory Clear

Indicates that the memory has been cleared. Use the NEXT key to
begin programming. After initial power up or a reset, the control
will be in MEM CLR (memory clear) mode. This mode is only
accessible once.

Toggle between MAINtAin (maintained) or MOMNtARY (momen-
tary) operation using the +/- key. When configured for momentary,
relays 1 and 3 will provide the ON pulses, and relays 2 and 4 will
provide the OFF pulses. An EL74 configured for momentary opera-
tion will become a two-channel control. Use the NEXT key to con-
tinue programming.

Toggle between 12 hour (AM/PM) or 24 hour (00:00-23:59) clock
format using the +/- key.

NOTE: After selecting relay operation and clock format, press the
PROGRAM key to begin programming steps in the TIME header.

17

Содержание EL74





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды