ASSEMBLY INSTRUCTIONS CONT.
Step 11:
Connect the two end handle sections to the
frame tubes as shown. Insert U-bolts and
secure with washers and nuts. Be sure U-bolts
are aligned square to the frame tubes at the
indicator marks as the nuts are tightened.
Step 12:
Slide in the adjustable side arms to one of
two positions. Pull down on the spring-load-
ed pin to allow movement. (Note: Outer
position of the side arms will allow 4’ wide
material such as wall board to be centered
on the cart.)
(TROLL® 2721 When completed.)
Note: Assembly sequence requires lifting and positioning heavy components. Procedure
may require two people.
Parts Included:
Fasteners:
Frame Tubes
4
Axle Frames 3
End Handle Section 2
8” Casters
6
Adjustable Side arms 4
1/2” U Bolts
20
1/2” Flat Washers
40
1/2” Lock Washers
40
1/2” Hex Nuts
40
3/4” x 2” Bolts
2
3/4” Lock Nuts
2
3/8” x 1” Bolts
24
3/8” Lock Nuts
24
5/16” Flat Washers
48
