6. Pass the crimped end of the cable over the
sheave pocket as shown
7. Insert the crimped end of the cable through the
oblong hole in the winch flange and behind the
mooring tab as shown.
8. Pull the stack out of the cable to seat the
crimped end securely behind the mooring tab
as shown.
9. Rotate the winch handle clockwise to take up
the slack in the cable around the winch drum.
10. Push back on the foot bracket latch, insert
bracket, and release latch.
11. Insert the cradle on the PANELLIFT® Drywall
Lift and you’re ready to lift drywall from
floor to ceiling.
INITIAL ASSEMBLY Cont.
3
