TURNBUCKLE
Attach hook end to
inner
telescoping ladder – not
outer ladder. TIGHTEN SECURELY
- NOTE: CHECK TO MAKE SURE THIS ASSEMBLY
REMAINS SNUG DURING USE.
Begin with assembled standard Tele-Tower
®
- FULLY EXTEND THE BASE OUTRIGGERS
AND SET CASTER BRAKES.
- REPLACE THE SAFETY RAILS WITH THE
EXTENSION COUPLER PIPES
Place the extension ladders on the coupler pipes with
the turnbuckle fastener on the bottom as shown.
Loosen the turnbuckles on the extension ladders
and turn them down toward the deck.
Position deck on the
TOP RUNGS
of the extension
ladders only.
NEVER
position the deck on any of the
lower rungs as this will prevent proper installation of
the anti-sway braces resulting in an unstable structure.
STEP 2
STEP 1
STEP 3
STEP 5
STEP 4
OUTRIGGERS
Fully Extended
Brake ON
