LOADING UP YOUR PANELLIFT
When loading your Panelli�®, place the
Cradle
in first. Makes sure the
Cradle
is
secured and res�ng on the notch properly, as
shown above.
Back
Side
Back
Side
When placing the
Cradle
, it is also important
to make sure the inserted area for the
crossarms lays on top of the rounded bar
s�cking out the back of the 117.
The next step is to insert the
Frame Assem-
bly
onto the 117. To do this, li� and align the
V-shaped opening with the V-shaped piece
poin�ng upward from the base of the 117,
this should simply slide in.
2
The next peice to a�ach is the
Tripod
. Place
it as shown above the center of the base.
A�er doing so, it is important to flip the
latch to secure the
Tripod
, preven�ng it
from falling.
Finally, a�ach each of the
Crossarms
and
insert them into the open trapezoidal slots
that they fit into. (See images above for
references.) Push them in un�l a “click” is
heard, to esure secure placement. A�er this
final step, your Panelli�® is fully loaded.
