4
Introduction
The family of EFM Based Network Extenders provide an extremely flexible and easy to
use solution for providing Ethernet based services to subscribers throughout the service
providers network.
The SNE2020 is fully DSL The Easy Way™ compliant, so that configuration
requirements are removed completely, allowing this device to be installed into the
customer premises quickly. The SNE2020 is also fully DSL The Easy Way packet based
utilizing 100 percent packet-based technology for optimum throughput and reliability.
The SNE2020 is a loop bonding endpoint for EFM-based 12000 and 4000 BLCs that
provides up to 4.6 Mbps of symmetrical bandwidth using two copper pairs.
The SNE2020 features two SHDSL ports, each capable of up to 2.3 Mbps symmetrical
bandwidth. When used with any loop bonding compatible product, two copper pairs may
be used to deliver double the bandwidth at any given distance. In addition, the SNE2020
can be used in a point to point deployment for high speed copper connections between
two locations.
Loop bonded SHDSL provides automatic load balancing and fail-over to provide
optimum redundancy and data throughput, all delivered with a plug and play ease of
use.
Package Contents
HANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from
damage due to electrostatic discharge (ESD) during normal
operation. When performing installation procedures,
however, take proper static control precautions to
prevent damage to equipment. If you are not sure
of the proper static control precautions, contact
your nearest sales or service representative.
Unpack and Inspect the Equipment. The following components should be included:
1 SNE2020G
1 Power supply
If there is any visible damage, do not attempt to connect the device. Contact your sales
or service provider.
!
