MIM2-A2-GZ40-00
October 2004
3
Product Documentation Online
Complete documentation for Paradyne products is available at
www.paradyne.com
. Select
Support
→
Technical Manuals
.
To order a paper copy of a Paradyne document, or to speak with a sales representative,
please call 1-727-530-2000.
Unpacking and Inspecting the Equipment
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
If there is any visible damage, do not attempt to install the MIM-2E1; contact your
sales representative.
Installing the MIM-2E1
The MIM-2E1 Micro Interface Module provides additional uplink ports for the
AµD8000 ADSL Micro DSLAM or BSX8000-5 Broadband Services Switch.
NOTE: All MIMs are hot swappable, although removal of a MIM disengages the
upstream network connection for the DSLAM.
Procedure
1. Using a flat-head screwdriver to loosen the fastening screws, remove the
cover plate from the MIM port on the front of your AµD8000 or BSX8000.
CAUTION: The cover plate should be stored for possible future use: if the MIM
is removed from your AµD8000 or BSX-8000, it must be replaced with either
another MIM or a cover plate. Do not operate an AµD8000 or BSX8000 with
an open MIM port.
2. Align the MIM-2E1 with the module guides inside the MIM port.
3. Slide the MIM-2E1 firmly into place. Do not use excessive force.
4. Secure the MIM-2E1 by tightening the fastening screws on the MIM faceplate
with a flat-head screwdriver.
!
