MIM1-A2-GZ40-00
October 2004
5
LED Indicators
Regulatory Notices
UNITED STATES – EMI NOTICE:
!
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the
requirements that no modifications will be made to the equipment
unless the changes or modifications are expressly approved by
Paradyne Corporation.
Table 1. LEDs
LED
STATE
INDICATION
ADDITIONAL INFORMATION
100
Solid Green
Fast Ethernet connection
(100 Mbps) is established.
If the 100 LED is illuminated, the Lnk LED
will also be illuminated.
No Illumination
No Fast Ethernet
connection.
If the 100 LED remains unlit but the Lnk
LED is illuminated then a link has been
established at 10 Mbps rather than 100
Mbps.
Act
Flashing Amber
Ethernet activity.
Traffic is flowing without any problems.
Solid Amber
Heavy traffic.
No Illumination
No Ethernet activity.
Either there is no Ethernet link or a link
exists but there is no activity.
Lnk
Solid Green
Ethernet connection is
established.
If the Lnk LED is illuminated but not the
100 LED then a 10 Mbps link has been
established. If the 100 LED is also
illuminated, then a 100 Mbps link has
been established.
No Illumination
No Ethernet connection.
The 100 and Act LEDs will remain unlit by
default.
!
