2
Install the I/O Card
See
Installing the I/O Card
in the Installation Instructions.
Install the Cables
Follow the appropriate instructions in the Installation Instructions for cabling
.
Remove the NAM from the 1-Slot Housing
Procedure
1.
Disconnect the power cord/
transformer, first from the
power outlet, then from the
rear of the iMarc unit.
2.
Disconnect the other cables.
3.
Using a small flat-blade
screwdriver, gently pry open
the housing at each of the four
connecting tab points.
4.
Remove the cover and lift
the NAM and its integrated
I/O card/backplane (rear
panel) from the base.
5.
Lay the NAM on an
electrostatic discharge-
protective work surface,
component side up, with the
card connectors on the left-
hand side.
Install the NAM
See
Installing the NAM into a Multislot Housing
in the
Installation Instructions.
"
*9128-A2-GN10-20*
98-15043a
98-15044a
Integrated
I/O Card/Backplane
NAM
Base
Copyright
©
2003 Paradyne Corporation. Printed in U.S.A.
