7
8775-A2-GZ40-00
March 1998
Connecting to the DTE Equipment
Connection to the four ports of the 8775 Termination Unit is through the 100-pin
EIA-530 interface connector on its faceplate. Use one of the DTE cables listed
under
Cables You Need
on page 3.
Procedure
To connect the Hotwire 8775 Termination Unit to your DTE equipment:
1. Connect the 100-position connector of the cable to the connector on the
faceplate of the 8775 Termination Unit. Align one end of the cable connector
with the card connector, then push on the cable connector until it seats.
The end of the cable connector has a release button. To remove the
connector, press the release button and pull the connector away from the
card.
97-15726
-48V
RT
N
F
G
A
B
A
B
48VD
ETHERNET
MCC
8000
SYSTEM
OK
Alr
m T
est
TX
RX
Col
4
SYSTEM
OK
Alr
m T
est
1
2
3
1
2
3
G.703 ALRM
DSL POR
T
LINK-UP
4
4
SYSTEM
OK
Alr
m T
est
1
2
3
1
2
3
G.703 ALRM
DSL POR
T
LINK-UP
4
2. Feed the cable through the Cable Guide if it is in use. When all cables are
installed, anchor them with cable ties to the rack, DSLAM, or Cable Guide.
3. Connect the four terminating connectors to your DTE equipment.
All manuals and user guides at all-guides.com
