Paradyne Hotwire 7995, Руководство по установке

Страница: 23 / 32

23
Table 11. SNMP Traps Options
SNMP Traps
Possible Settings: Enable, Disable
Default Setting: Enable
Controls the generation of SNMP trap messages.
NMS
n IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
For IP Complex systems, specifies the Internet Protocol address used to identify each
SNMP trap manager (limit of 5).
NMS n Destination
Possible Settings: DSL, COM
Default Setting: DSL
For IP Complex systems, provides the network destination path of each trap manager.
COM displays if Port Use is set to NetLink.
General Traps
Possible Settings: Disable, Warm, AuthFail, Both
Default Setting: Both
Determines which SNMP traps are sent to each trap manager.
Enterprise Specific Traps
Possible Settings: Enable, Disable
Default Setting: Disable
Determines if SNMP traps are generated for enterprise-specific events.
Link Traps
Possible Settings: Disable, Up, Down, Both
Default Setting: Both
Determines if SNMP traps are generated for link up and link down for one of the
communication interfaces.
Link Traps Interfaces
(Model 7996 Only)
Possible Settings: Network, G.703, All
Default Setting: All
Determines if the SNMP
linkUp, linkDown, and interface-related enterpriseSpecific
traps are generated for the network interface, DTE port, or both.